The Belkin AX3200 covers over 2000 square feet of your home or office area. You can install Belkin AX3200 anywhere in your home and it acquires every corner with a wifi signal. It can handle more than 25 devices at a time without interruption. So, this is the perfect router for gaming, streaming, or small office setup.
What Is Belkin AX3200?
The Belkin router is one of the best routers in terms of features. Some of its features are given below:
- EasyMesh certified
- Supports parent and child node
- Supports non-mesh mode or EasyMesh mode
- Dual-band router
- Support Wifi 6 technology
- Supports 802.11ax up to 3.2 Gbps
- 4×4 Spatial streams
- MU-MIMO technology
- Beamforming technology
- Parental Controls
- Guest Access
- Easy browser-based setup
- Four-gigabit ethernet ports
- One gigabit internet port
- One USB 2.0 port for external hard drive support
- Supports Wi-Fi Protected Setup (WPS)
- Coverage of up to 2,000 sq ft
- Dimensions (L x W x H): 156 mm x 77.11 mm x 220 mm
- Weight: 638 g
- Best for streaming and gaming
Minimum Requirment To Setup Belkin RT3200
You need at least one computer with wifi or ethernet cable to make a connection with the router. A modem with active internet connection. You need PPPOE username and password to setup belkin ax3200 if your internet works on PPPOE connection.
How To Install Belkin AX3200 Wifi Router
Belkin RT3200 support parent and child node easymesh. Its installation is as similar as setup of Belkin AX1800. Further, follow the instructions below to setup the Belkin AX3200 Wifi router.
- Plugged in Modem to the WAN or Internet port of the Belkin router with an ethernet cable.
- Plug in the Power adapter in your Belkin AX3200 wifi router.
- The power light blinks white means your router is starting.
- Connect the LAN port of the computer to the LAN port of the router using an ethernet cable. You can use your laptop wifi to connect with the router.
- Search wifi networks on your laptop.
- You will find Belkinxxxxx or Belkinxxxxx_5GHz. Here XXXX must be some alphanumeric numbers that show the serial number of that router.
- Once you will try to connect with wifi it will ask you for a password to connect. Find the wifi password on the back of the BelkinAx3200.
- After connecting with the router open the web browser on your PC.
- Type https://myrouter.local or 192.168.1.1 on the address bar of the browser and hit enter.
- Sometimes it won’t let you open the Belkin page. In this situation, you have to do a mac address clone of the router.
- Check mark on I have read and accept the License Terms for using this software and then click Next.
- Type your 2.4 GHz and 5 GHz WiFi names and passwords then click Next.
- Now you have to create a new router password. This will use for the next login on your setting page. That is also called an admin password.
- The next screen will show you all the settings before going to apply on your router. Click on Next if all your Belkin router settings are as you decide.
- Your PC will be disconnected from the router as soon as the settings are applied. You have to reconnect with your new wifi name and password.
- Once you will connect the Belkin setup will continue.
- Click Yes for adding this router as an EasyMesh child node. For making it Parent Node select No I’m done.
- The next page will ask you to register your product. Enter your email address checkmark and then click next.
- Select Automatic update by doing a tick mark on it.
- Tap on Check Firmware to update the latest firmware in your router.
- After updating firmware click on Done.
- Your Belkin AX3200 router has been installed and is ready to use.
Frequently Asked Questions On Belkin AX3200 EasyMesh Router
Belkin AX3200 & RT3200 Both Are Same?
Yes, Belkin AX3200 and rt3200 both are the same devices.
Does Belkin RT3200 Support EasyMesh?
Yes, you can use Belkin ax3200 as the parent node and child node as easy mesh. At the time of Belkin rt3200 installation you have to select either works as easy mesh or parent node.
Can I Use The Same WiFi Name And Password For Both Bands 2.4 & 5 GHz?
Yes, you can use the same wifi name and password for both network bands. You can identify by your wifi name_5GHz only.
Can I Use Belkin AX3200 As Bridge Mode?
Yes, you can set up belkin rt3200 as bridge mode. It also supports wireless bridges within the network. In bridge or easy mesh you can’t use USB port for drive sharing.
Can I Connect External Storage To Belkin AX3200?
Yes, you can plug in an external USB drive to this router but it must be set up on the Parent node. In Child or Easy Mesh Node, USB storage doesn’t work.
Does Belkin RT3200 Installation Need Setup CD?
No, you can install Belkin ax3200 without setup cd disc. You should use web setup interface to install belkin rt3200 wifi 6 router.