In Netgear Orbi Router, you get lights in three places. There is one top and one bottom ring light. Which indicates connectivity.
The third is a power light on the back side of the Orbi router. Which shows the power status of the router.
The lights may flash or steady in different colors. Each color shows a fixed sign. Such as green, magenta or purple, orange, amber, and red.
What Do Light Colors Mean To Orbi Router?
All the different colors of lights in the Orbi router have different meanings. The router gets troubleshot according to the color of the light. So, let’s know about the lights of the Orbi router and its solution too.
Netgear Orbi Ring Led Lights
- Your Netgear orbi router is powering up when the ring light is solid white.
- A flashing white ring light says your orbi router is in factory default mode.
- Netgear orbi flashing magenta or purple means the router is not able to find modem or internet. There may be a WAN port is unplugged or the internet link is down.
Netgear Orbi Power Led Colors And Its Means
You may find the orbi power led on the back of the router.
Power Led Off
If no light is lit in orbi power led then it means that your router is powered off. You have to check the power adapter and plug it in.
Solid Green Or White In Color
When you power up the Netgear Orbi Router, its power light should be solid green or white.
Netgear Orbi Solid Amber
The power light turns solid amber when the orbi router is on. Now the router is activating the Internet settings.
Netgear Orbi Router Blinking Amber
There are two reasons for Netgear orbi flashing orange or amber in color. Either the firmware of the router is being updated or the reset button is pressed. You have to wait to complete the firmware update process.
Orbi Power Led Blinking White
If your ORBI router is blinking white then its firmware has corrupted. It can happen when firmware updates are interrupted. There could be two reasons for the firmware upgrade to stop. Either your router is turned off during the update or the internet is disconnected.
In this case, you have to update Netgear orbi firmware again.
Netgear Orbi Solid Red In Color
This stage can be a bit serious when the Orbi shows red color on the router. This indicates that your router hardware has failed. Some of its electronic parts have been damaged.
In this case, you should reset the router. Sometimes orbi router reset works and your router starts working.
Netgear Orbi Internet Led Colors And Its Means
Find what does mean when internet lights in different colors:
Internet Light Is Off
The Internet lights off when there is no connection between the modem and the router. In this stage, you will need to connect the modem and the wireless router with an Ethernet cable.
If it is already connected then check for loose connection. Unplug the cable from the LAN port and plug it back in. Restart the modem as well as the router and wait for the lights.
Solid Green Or White Color
If the internet led light is steady green or white then your router is working. You are connected to the Internet.
Orbi Router Internet Light Is Solid Amber
Solid amber or orange light on the internet Led means you do not have internet. There is a connection between the modem and the orbi router but the internet not working. To solve the internet issue read Netgear orbi not connecting to the internet.
Orbi Internet Light Blinking White
When you access the Internet from the Orbi router, its Internet light flashes white. It shows that internet data transfer is happening. The faster the data is downloaded, the faster this white light will blink.
Netgear Orbi Router Colors On USB Lights
You can plug n play USB drive on orbi USB ports. Netgear orbi router also supports USB 3.0 version. It has a separate LED light on the router and it flashes.
The USB Led lights off until a flash drive is connected. It starts blinking a USB device is plugged in and is trying to connect. It turns Solid green or white when the USB drive is ready to use.
Netgear Orbi Ethernet Port Lights
When the internet speed on the Ethernet port is 1 Gbps, then it becomes white or green in color. The Ethernet port’s light turns amber when the Internet speed is 100 Mbps or less.
- When the ethernet port light off means no device is connected to that port.
- Solid light on the ethernet port says the device is powered on and connected to that port.
- The Ethernet port is blinking means data is sending and receiving with that port.
Netgear Orbi Router WPS Connection Lights
WPS is the smart way to connect devices to the router. In the wps feature, the device must also support wps technology. You can connect devices to Netgear orbi using WPS.
If the WPS light off means no device is connected to the router using wps. When we are connecting the device, the WPS light starts blinking. The Orbi WPS light turns solid when the device is connected.
Netgear Orbi Satellite Lights Color And Their Meaning
Netgear satellite connects with the orbi router and forwards the internet. It has also ring lights like orbi routers. The light on the orbi satellite changes with actions. Let us find out below:
- Solid white color means the orbi satellite turning on.
- If the Orbi satellite ring light flashes magenta once, it means that the Orbi satellite is trying to connect to your Orbi router. If the ring led flashes purple again and again, then your orbi satellite is disconnected from the router.
- Whenever the satellite is not able to get IP from the orbi router the ring light turns solid magenta.
- If your Orbi satellite ring is solid blue, the connection between your Orbi router and satellite is acceptable.
- A solid amber color on the orbi satellite ring means the connection between the router and satellite is fair.
Final Words
So, there are the lights and their colors on the Netgear orbi router as well as satellite. According to the reason you can troubleshoot your problem. Follow the related articles below that can help you to fix Netgear orbi problems.